Skip to content

Unit 3: Trigonometric & Polar Functions

Unit 3 examines periodic motion and angular displacement, transitioning from geometric right-triangle definitions to the circular function definitions on the coordinate plane, sinusoidal modeling, inverse trigonometric functions, and polar coordinates.


3.1 Radian Measure & The Unit Circle

An angle of \(\theta\) radians subtends an arc length \(s\) equal to \(\theta\) on a circle of radius \(r = 1\):

\[\theta = \frac{s}{r} \implies s = r\theta\]

On the unit circle (\(x^2 + y^2 = 1\)), the coordinates of the terminal ray point at angle \(\theta\) define the circular functions:

\[\cos\theta = x, \quad \sin\theta = y, \quad \tan\theta = \frac{y}{x} = \frac{\sin\theta}{\cos\theta} \quad (x \neq 0)\]
\[\sec\theta = \frac{1}{\cos\theta}, \quad \csc\theta = \frac{1}{\sin\theta}, \quad \cot\theta = \frac{\cos\theta}{\sin\theta}\]

Core Pythagorean Identities

\[\sin^2\theta + \cos^2\theta = 1\]
\[\tan^2\theta + 1 = \sec^2\theta\]
\[1 + \cot^2\theta = \csc^2\theta\]

3.2 Sinusoidal Modeling & Transformations

A sinusoidal function models periodic behavior using the general form:

\[f(t) = a \sin(b(t - c)) + d \quad \text{or} \quad f(t) = a \cos(b(t - c)) + d\]

where: - Amplitude: \(|a| = \dfrac{\text{Maximum} - \text{Minimum}}{2}\) - Midline (Vertical Shift): \(y = d = \dfrac{\text{Maximum} + \text{Minimum}}{2}\) - Period (\(T\)): The length of one complete cycle: $\(T = \frac{2\pi}{|b|} \iff |b| = \frac{2\pi}{T}\)$ - Frequency (\(f\)): \(f = \dfrac{1}{T} = \dfrac{|b|}{2\pi}\) - Phase Shift (Horizontal Shift): \(c\) (shifts right if \(c > 0\), left if \(c < 0\))


3.3 Inverse Trigonometric Functions

Because trigonometric functions are periodic, their domains must be restricted to standard principal branches so that they become one-to-one (invertible):

Function Notation Restricted Domain of \(f\) (Range of \(f^{-1}\)) Domain of \(f^{-1}\)
Arcsine \(y = \arcsin(x) = \sin^{-1}(x)\) \(\left[-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right]\) \([-1, 1]\)
Arccosine \(y = \arccos(x) = \cos^{-1}(x)\) \([0, \pi]\) \([-1, 1]\)
Arctangent \(y = \arctan(x) = \tan^{-1}(x)\) \(\left(-\dfrac{\pi}{2}, \dfrac{\pi}{2}\right)\) \((-\infty, \infty)\)

3.4 Double-Angle & Sum/Difference Identities

\[\sin(2\theta) = 2\sin\theta\cos\theta\]
\[\cos(2\theta) = \cos^2\theta - \sin^2\theta = 2\cos^2\theta - 1 = 1 - 2\sin^2\theta\]
\[\tan(2\theta) = \frac{2\tan\theta}{1 - \tan^2\theta}\]

3.5 Polar Coordinates & Complex Plane

In the polar coordinate system, points are designated by \((r, \theta)\), where \(r\) is the directed radial distance from the pole (origin) and \(\theta\) is the angle from the polar axis.

Conversion Formulas

\[\begin{aligned} x &= r\cos\theta, & y &= r\sin\theta \\ r^2 &= x^2 + y^2, & \tan\theta &= \frac{y}{x} \quad (x \neq 0) \end{aligned}\]

Complex Numbers in Polar (Trigonometric) Form

A complex number \(z = x + i y\) can be written in polar form with modulus \(r = |z| = \sqrt{x^2 + y^2}\) and argument \(\theta = \operatorname{arg}(z)\):

\[z = r(\cos\theta + i\sin\theta) = r e^{i\theta}\]

By De Moivre's Theorem, for any integer \(n\):

\[z^n = [r(\cos\theta + i\sin\theta)]^n = r^n(\cos(n\theta) + i\sin(n\theta))\]

AP Exam Tip: Interpreting Negative Radii in Polar Coordinates

In polar coordinates \((r, \theta)\), if \(r < 0\), the point is plotted by first rotating by \(\theta\), and then projecting a distance \(|r|\) in the opposite direction (along the ray \(\theta + \pi\)).

Therefore, the polar point: $\(\left(-3, \; \frac{\pi}{4}\right) \quad \text{is identical to} \quad \left(3, \; \frac{5\pi}{4}\right)\)$ In Cartesian coordinates: $\(x = -3\cos(\pi/4) = -\frac{3\sqrt{2}}{2}, \quad y = -3\sin(\pi/4) = -\frac{3\sqrt{2}}{2}\)$


📝 Practice Problem & Solution

Practice Problem 3.1: Modeling Periodic Ferris Wheel Motion

A giant Ferris wheel with a diameter of \(50\,\text{m}\) completes one full counterclockwise revolution every \(4\,\text{minutes}\). Passengers board the wheel at the lowest point, which is \(2\,\text{m}\) above the ground.

Assume a passenger boards at time \(t = 0\,\text{minutes}\).

a. Determine the amplitude, midline, and period of the passenger's height function \(h(t)\).
b. Construct a sinusoidal function of the form \(h(t) = a\cos(b(t - c)) + d\) modeling the height \(h(t)\) in meters at time \(t\) in minutes.
c. Find the first two positive times \(t > 0\) when the passenger is exactly \(40\,\text{m}\) above the ground.

Show Step-by-Step Solution

Part a: Determine geometric parameters: - Diameter \(= 50\,\text{m} \implies \text{Radius } R = 25\,\text{m}\). - Minimum height: \(h_{\text{min}} = 2\,\text{m}\). - Maximum height: \(h_{\text{max}} = 2 + 50 = 52\,\text{m}\). - Amplitude: \(a = \frac{h_{\text{max}} - h_{\text{min}}}{2} = \frac{52 - 2}{2} = \mathbf{25\,\text{m}}\). - Midline: \(d = \frac{h_{\text{max}} + h_{\text{min}}}{2} = \frac{52 + 2}{2} = \mathbf{27\,\text{m}}\). - Period: \(T = \mathbf{4\,\text{minutes}}\).


Part b: Formulate the cosine model:

The frequency parameter \(b\) is:

\[b = \frac{2\pi}{T} = \frac{2\pi}{4} = \frac{\pi}{2}\]

Since the passenger begins at the absolute minimum at \(t = 0\) (\(h(0) = 2\)), we can use an inverted cosine model (\(a = -25\)) with zero phase shift (\(c = 0\)):

\[h(t) = -25\cos\left(\frac{\pi}{2}t\right) + 27\]

Part c: Solve for \(h(t) = 40\,\text{m}\):

\[-25\cos\left(\frac{\pi}{2}t\right) + 27 = 40\]
\[-25\cos\left(\frac{\pi}{2}t\right) = 13 \implies \cos\left(\frac{\pi}{2}t\right) = -\frac{13}{25} = -0.52\]

Take the principal inverse cosine:

\[\theta_1 = \arccos(-0.52) \approx 2.1179\,\text{radians}\]

By the symmetry of the cosine function on \([0, 2\pi]\), the second angle in the first cycle is:

\[\theta_2 = 2\pi - \theta_1 \approx 6.2832 - 2.1179 = 4.1653\,\text{radians}\]

Now solve for \(t = \frac{2}{\pi}\theta\):

\[t_1 = \frac{2}{\pi}(2.1179) \approx \mathbf{1.348\,\text{minutes}}\]
\[t_2 = \frac{2}{\pi}(4.1653) \approx \mathbf{2.652\,\text{minutes}}\]