Unit 8: Fluids
Fluids (liquids and gases) represent states of matter that yield continuously to shear stress and assume the shape of their containing boundaries.
8.1 Density & Pressure
-
Density (\(\rho\)): Mass per unit volume (in \(\text{kg/m}^3\)): $\(\rho = \frac{m}{V}\)$ (For water at standard conditions, \(\rho_{\text{water}} = 1{,}000\,\text{kg/m}^3 = 1.0\,\text{g/cm}^3\)).
-
Pressure (\(P\)): Normal compressive force exerted per unit surface area (in Pascals, \(\text{Pa} = \text{N/m}^2\)): $\(P = \frac{F_\perp}{A}\)$ (Standard atmospheric pressure: \(P_{\text{atm}} = 1.013 \times 10^5\,\text{Pa} \approx 101\,\text{kPa}\)).
8.2 Hydrostatic Pressure & Pascal's Principle
For an incompressible fluid of uniform density \(\rho\) at rest, pressure increases linearly with vertical depth \(h\):
where: - \(P_0\) is the pressure at the liquid surface (often \(P_{\text{atm}}\)). - \(\rho g h\) is the hydrostatic pressure contributed by the fluid column. - Gauge Pressure (\(P_g\)): The difference between absolute pressure and atmospheric pressure: $\(P_g = P - P_{\text{atm}} = \rho g h\)$
Pascal's Principle
An external pressure applied to an enclosed, incompressible fluid is transmitted undiminished to every portion of the fluid and container walls:
8.3 Archimedes' Principle & Buoyancy
An object wholly or partially immersed in a fluid experiences an upward buoyant force (\(\vec{F}_b\)) equal to the weight of the fluid displaced by the object:
Floating & Sinking Criteria
- Fully Submerged Object: $\(F_{\text{net}} = F_b - F_g = \rho_{\text{fluid}} V g - \rho_{\text{object}} V g = (\rho_{\text{fluid}} - \rho_{\text{object}}) V g\)$
- Sinks if \(\rho_{\text{object}} > \rho_{\text{fluid}}\).
- Suspended if \(\rho_{\text{object}} = \rho_{\text{fluid}}\).
- Floating Object in Static Equilibrium (\(\sum F_y = 0\)): $\(F_b = F_g \implies \rho_{\text{fluid}} V_{\text{submerged}} g = \rho_{\text{object}} V_{\text{total}} g\)$ $\(\frac{V_{\text{submerged}}}{V_{\text{total}}} = \frac{\rho_{\text{object}}}{\rho_{\text{fluid}}}\)$ (The fraction submerged equals the ratio of object density to fluid density).
8.4 Fluid Dynamics: The Continuity Equation
For an ideal fluid (incompressible, non-viscous, laminar streamline flow), mass conservation dictates that the volumetric flow rate (\(Q\)) remains constant along a pipe of varying cross-sectional area:
where \(A\) is the cross-sectional area and \(v\) is the average fluid velocity: - As the pipe narrows (\(A\) decreases), fluid speed \(v\) must increase proportionally: $\(v_2 = v_1 \left(\frac{A_1}{A_2}\right)\)$
8.5 Bernoulli's Equation
Bernoulli's equation represents the work-energy theorem applied to a continuous fluid streamline:
where: - \(P\) is the static pressure energy density. - \(\frac{1}{2}\rho v^2\) is the kinetic energy density of fluid motion. - \(\rho g y\) is the gravitational potential energy density.
Torricelli's Law
For a large open tank of liquid with a small drain hole at depth \(h\) below the surface (\(A_{\text{tank}} \gg A_{\text{hole}} \implies v_{\text{surface}} \approx 0\) and \(P_{\text{surface}} = P_{\text{hole}} = P_{\text{atm}}\)):
AP Exam Tip: The Venturi Effect (Narrow Pipe Means LOWER Pressure)
A common misconception is believing that when water or air rushes into a narrow constriction, pressure increases because the fluid is "squeezed".
In reality, by the continuity equation, the fluid must accelerate to a higher velocity (\(v_2 > v_1\)).
By Bernoulli's equation at horizontal height (\(y_1 = y_2\)): $\(P_1 + \frac{1}{2}\rho v_1^2 = P_2 + \frac{1}{2}\rho v_2^2\)$
Because the kinetic energy density \(\frac{1}{2}\rho v^2\) increases, the static pressure \(P\) must decrease: $\(v_2 > v_1 \implies P_2 < P_1\)$
This static pressure reduction explains lift in airplane wings, atomizer sprayers, and the Venturi flow meter.
📝 Practice Problem & Solution
Practice Problem 8.1: Buoyancy and Apparent Weight
A solid metal sculpture of unknown composition has a mass of \(m = 12.0\,\text{kg}\). When the sculpture is completely submerged in a vat of water (\(\rho_{\text{water}} = 1{,}000\,\text{kg/m}^3\)), a spring scale attached to the sculpture reads an apparent weight of \(F_{\text{scale}} = 75.0\,\text{N}\). Take \(g = 10\,\text{m/s}^2\).
a. Calculate the magnitude of the buoyant force exerted on the submerged sculpture.
b. Determine the volume \(V\) of the sculpture.
c. Calculate the density \(\rho_{\text{metal}}\) of the sculpture and state whether it would float in liquid mercury (\(\rho_{\text{mercury}} = 13{,}600\,\text{kg/m}^3\)).
Show Step-by-Step Solution
Part a: Calculate the buoyant force:
Draw the vertical forces on the submerged sculpture in static equilibrium: - Upward scale tension: \(F_{\text{scale}} = 75.0\,\text{N}\) - Upward buoyant force: \(F_b\) - Downward true weight: \(F_g = mg = (12.0\,\text{kg})(10\,\text{m/s}^2) = 120.0\,\text{N}\)
Apply Newton's First Law (\(\sum F_y = 0\)):
Part b: Determine the volume of the sculpture:
By Archimedes' Principle:
Since the sculpture is completely submerged, \(V = V_{\text{submerged}}\):
Part c: Determine density of the sculpture:
(This is approximately the density of solid aluminum, \(\approx 2{,}700\,\text{kg/m}^3\)).
Floating in mercury: Since \(\rho_{\text{metal}} = 2{,}667\,\text{kg/m}^3 < \rho_{\text{mercury}} = 13{,}600\,\text{kg/m}^3\), the sculpture will easily float in mercury, with: