Unit 6: Energy & Momentum of Rotating Systems
Rotating bodies possess both kinetic energy distributed across their moving mass and angular momentum that remains conserved in the absence of net external torques.
6.1 Rotational Kinetic Energy & Work
For a rigid body rotating with angular velocity \(\omega\) about an axis:
Work Done by a Torque
A torque \(\tau\) acting through an angular displacement \(\Delta\theta\) does work on the rotating system:
By the Work-Energy Theorem for Rotation:
6.2 Rolling Without Slipping
When a symmetrical object (cylinder, sphere, hoop) of mass \(M\) and radius \(R\) rolls without slipping along a surface: - The point of contact with the ground is instantaneously at rest (\(v_{\text{contact}} = 0\)), held by static friction. - The translational center of mass speed and angular speed are coupled: $\(v_{\text{cm}} = R \omega\)$
Total Mechanical Kinetic Energy
The total kinetic energy is partitioned into translational and rotational contributions:
Writing \(I_{\text{cm}} = c M R^2\) (where \(c\) is the shape constant, e.g. \(c = 1/2\) for a disk, \(c = 2/5\) for a sphere):
6.3 Angular Momentum
Angular momentum (\(\vec{L}\)) is the rotational analog of linear momentum:
- For a Rigid Extended Object Rotating about a Principal Axis: $\(L = I \omega\)$
- For a Point Particle of Mass \(m\) Moving at Velocity \(\vec{v}\) Relative to a Pivot: $\(L = r_\perp p = m v r \sin\theta\)$ where \(r_\perp\) is the perpendicular distance from the chosen origin to the particle's velocity vector line.
6.4 The Angular Impulse-Momentum Theorem
Newton's Second Law for rotation in terms of angular momentum:
The angular impulse imparted by an external torque produces a change in the total angular momentum of the system.
6.5 Conservation of Angular Momentum
If the net external torque acting on a system about a chosen axis is zero (\(\sum \vec{\tau}_{\text{ext}} = 0\)):
Key Physical Phenomenon: Changing Rotational Inertia
When an internal mechanism alters mass distribution (e.g., a spinning figure skater pulling their arms inward): - \(I\) decreases \(\implies \omega\) must increase to preserve \(L = I\omega\). - Kinetic energy is NOT conserved: \(K = \frac{L^2}{2I}\) increases because the skater's muscles perform positive work pulling the mass inward against centrifugal effects!
AP Exam Tip: The Great Incline Rolling Race
A classic AP Physics 1 question releases a solid sphere (\(I = \frac{2}{5}MR^2\)), a uniform disk (\(I = \frac{1}{2}MR^2\)), and a hollow hoop (\(I = MR^2\)) from rest at the top of an incline of height \(h\).
By energy conservation: $\(M g h = \frac{1}{2} M v^2(1 + c) \implies v = \sqrt{\frac{2gh}{1 + c}}\)$
- Smaller \(c \implies\) less energy diverted to rotation \(\implies\) higher linear speed \(v\).
- Finishing order: Solid Sphere (\(c = 0.40\)) wins first, followed by Disk (\(c = 0.50\)), and Hoop (\(c = 1.0\)) finishes last!
- Notice: This result is completely independent of the mass \(M\) and radius \(R\)!
📝 Practice Problem & Solution
Practice Problem 6.1: Point Mass Striking a Pivoted Rod
A uniform thin rod of mass \(M = 3.0\,\text{kg}\) and length \(L = 0.80\,\text{m}\) is pivoted at its top end about a frictionless horizontal pin (\(I_{\text{rod}} = \frac{1}{3}ML^2\)). The rod hangs vertically at rest.
A small sticky clay blob of mass \(m = 0.50\,\text{kg}\) traveling horizontally with velocity \(v_0 = 12\,\text{m/s}\) strikes the very bottom tip of the rod and sticks to it.
a. Calculate the rotational inertia of the combined rod + clay system about the pivot immediately after impact.
b. Using conservation of angular momentum about the pivot, calculate the initial angular velocity \(\omega\) of the system immediately following the collision.
Show Step-by-Step Solution
Part a: Rotational inertia of the composite system:
The composite rotational inertia about the pivot is the sum of the rod and the clay blob (treated as a point mass at distance \(L\)):
Substitute the numerical values:
Part b: Angular velocity from conservation of angular momentum:
Choose the pivot as the origin. During the brief collision, external forces act at the pivot (\(r = 0\)), so the external torque about the pivot is zero (\(\tau_{\text{ext}} = 0\)). Angular momentum is conserved:
Before the collision, the rod is at rest. The moving clay blob has angular momentum:
After the collision, the combined system rotates as a single rigid body with angular momentum:
Set \(L_i = L_f\):