Skip to content

Unit 4: Linear Momentum

Momentum is a fundamental vector quantity that measures an object's resistance to stopping, representing inertia in motion.


4.1 Linear Momentum & Impulse

The linear momentum (\(\vec{p}\)) of an object of mass \(m\) traveling with velocity \(\vec{v}\) is:

\[\vec{p} = m \vec{v}\]

Momentum is a vector quantity having the same direction as the velocity vector, measured in \(\text{kg}\cdot\text{m/s}\) or \(\text{N}\cdot\text{s}\).

The Impulse-Momentum Theorem

Newton's Second Law can be expressed in terms of momentum:

\[\vec{F}_{\text{net}} = \frac{\Delta\vec{p}}{\Delta t} \implies \vec{J} = \vec{F}_{\text{net}} \Delta t = \Delta\vec{p} = m\vec{v}_f - m\vec{v}_i\]

The vector Impulse (\(\vec{J}\)) produces a change in the momentum of the object: - For a variable force \(\vec{F}(t)\), the impulse equals the area under the Force vs. Time graph: $\(\vec{J} = \int_{t_i}^{t_f} \vec{F}(t)\,dt = \vec{F}_{\text{avg}} \Delta t\)$


4.2 Conservation of Linear Momentum

For a system of interacting particles, the internal forces between bodies occur in equal and opposite pairs by Newton's Third Law (\(\vec{F}_{12} = -\vec{F}_{21}\)).

If the net external force acting on the system is zero (\(\sum \vec{F}_{\text{ext}} = 0\)), the total linear momentum of the system is strictly conserved:

\[\sum \vec{p}_i = \sum \vec{p}_f \implies m_1 \vec{v}_{1i} + m_2 \vec{v}_{2i} = m_1 \vec{v}_{1f} + m_2 \vec{v}_{2f}\]

In two dimensions, momentum conservation holds independently along each orthogonal axis:

\[\sum p_{ix} = \sum p_{fx} \quad \text{and} \quad \sum p_{iy} = \sum p_{fy}\]

4.3 Center of Mass Velocity

The velocity of the center of mass of a system of particles is:

\[\vec{v}_{\text{cm}} = \frac{\sum m_i \vec{v}_i}{\sum m_i} = \frac{\vec{p}_{\text{total}}}{M_{\text{total}}}\]

In an isolated system (\(\vec{F}_{\text{ext}} = 0\)), the center of mass velocity cannot change:

\[\vec{v}_{\text{cm}} = \text{constant}\]

4.4 Classification of Collisions

Total momentum is conserved in all collisions within an isolated system. Collisions are classified by what happens to total mechanical kinetic energy:

Collision Type Momentum Conserved? Kinetic Energy Conserved? Key Physical Characteristics
Elastic :white_check_mark: Yes :white_check_mark: Yes (\(K_i = K_f\)) Ideal atomic collisions, bouncy magnetic gliders
Inelastic :white_check_mark: Yes :x: No (\(K_f < K_i\)) Energy transformed into thermal, sound, deformation
Completely Inelastic :white_check_mark: Yes :x: Maximum \(K\) loss Bodies stick together and move with identical final velocity \(v_f\)
Explosion / Separation :white_check_mark: Yes :x: \(K_f > K_i\) Chemical/stored elastic potential energy converts to kinetic

Completely Inelastic Collision Formula

When two masses collide and stick together:

\[m_1 v_{1i} + m_2 v_{2i} = (m_1 + m_2) v_f \implies v_f = \frac{m_1 v_{1i} + m_2 v_{2i}}{m_1 + m_2}\]

AP Exam Trap: Momentum is a Vector (Watch the Negative Signs!)

A frequent error on AP Physics 1 exams is treating momentum as a scalar when an object bounces off a barrier.

Consider a rubber ball of mass \(m\) striking a rigid wall with speed \(v\) and bouncing back with the same speed \(v\): - Initial momentum: \(p_i = +mv\) - Final momentum: \(p_f = -mv\) - Change in momentum (Impulse): $\(\Delta p = p_f - p_i = -mv - (+mv) = -2mv \quad (\text{Magnitude } 2mv)\)$

If you forget the negative direction of \(\vec{v}_f\), you will incorrectly calculate \(\Delta p = 0\)!


📝 Practice Problem & Solution

Practice Problem 4.1: The Ballistic Pendulum

In a classic laboratory ballistic pendulum experiment, a wooden block of mass \(M = 1.95\,\text{kg}\) is suspended from lightweight cords of length \(L = 1.2\,\text{m}\). A bullet of mass \(m = 0.05\,\text{kg}\) is fired horizontally with speed \(v_0\) into the block, embedding itself completely.

After the collision, the block + embedded bullet pendulum swings upward, reaching a maximum vertical height of \(h = 0.20\,\text{m}\). Take \(g = 10\,\text{m/s}^2\).

a. Determine the speed \(V\) of the block + bullet system immediately after the collision.
b. Calculate the initial speed \(v_0\) of the bullet.
c. Determine the amount of mechanical energy dissipated during the collision.

Show Step-by-Step Solution

Part a: Speed \(V\) immediately after collision (Energy Conservation during swing):

After the bullet embeds, external forces are gravity and tension (which does zero work because it is perpendicular to motion). Mechanical energy is conserved during the upward swing:

\[K_{\text{post-collision}} = U_{g,\text{top}}\]
\[\frac{1}{2}(m + M) V^2 = (m + M) g h\]
\[V = \sqrt{2gh} = \sqrt{2(10)(0.20)} = \sqrt{4.0} = \mathbf{2.0\,\text{m/s}}\]

Part b: Initial speed \(v_0\) of the bullet (Momentum Conservation during collision):

During the collision impact, the collision time is infinitesimal (\(\Delta t \to 0\)), so external forces (gravity) impart negligible impulse. Total linear momentum is conserved:

\[p_{\text{initial}} = p_{\text{final}}\]
\[m v_0 + M(0) = (m + M) V\]
\[v_0 = \frac{m + M}{m} V = \frac{0.05 + 1.95}{0.05} (2.0) = \frac{2.00}{0.05} (2.0) = (40)(2.0) = \mathbf{80\,\text{m/s}}\]

Part c: Energy dissipated during collision:

  • Initial kinetic energy: $\(K_i = \frac{1}{2} m v_0^2 = \frac{1}{2}(0.05\,\text{kg})(80\,\text{m/s})^2 = \frac{1}{2}(0.05)(6{,}400) = 160\,\text{J}\)$

  • Kinetic energy immediately after collision: $\(K_f = \frac{1}{2}(m + M) V^2 = \frac{1}{2}(2.00\,\text{kg})(2.0\,\text{m/s})^2 = \frac{1}{2}(2.00)(4.0) = 4.0\,\text{J}\)$

  • Energy dissipated: $\(\Delta E_{\text{lost}} = K_i - K_f = 160\,\text{J} - 4.0\,\text{J} = \mathbf{156\,\text{J}}\)$

(Over \(97.5\%\) of the mechanical energy was dissipated into heat, deformation, and sound during the inelastic embedding).