Unit 5: Torque & Rotational Dynamics
Rotational dynamics extends translational mechanics to extended rigid bodies that rotate about a fixed axis or center of mass.
5.1 Rotational Kinematics
When an extended object rotates about a fixed axis, all points on the body undergo identical angular displacement (\(\theta\)), angular velocity (\(\omega\)), and angular acceleration (\(\alpha\)).
| Angular Variable | Translational Analogy (at radius \(r\)) | Relationship |
|---|---|---|
| Angular Position \(\theta\) (rad) | Linear Arc Length \(s\) (m) | \(s = r \theta\) |
| Angular Velocity \(\omega\) (rad/s) | Tangential Speed \(v_t\) (m/s) | \(v_t = r \omega\) |
| Angular Acceleration \(\alpha\) (\(\text{rad/s}^2\)) | Tangential Acceleration \(a_t\) (\(\text{m/s}^2\)) | \(a_t = r \alpha\) |
| Centripetal Acceleration \(a_c\) | Centripetal Acceleration | \(a_c = \frac{v_t^2}{r} = \omega^2 r\) |
Constant Angular Acceleration Equations
For constant \(\alpha\):
5.2 Torque
Torque (\(\vec{\tau}\)) is the quantitative measure of a force's effectiveness at causing or altering rotational motion about a designated pivot point:
where: - \(r\) is the distance from the pivot point (axis of rotation) to the point where the force is applied. - \(\theta\) is the angle between the position vector \(\vec{r}\) and the force vector \(\vec{F}\). - \(r_\perp = r\sin\theta\) is the lever arm (perpendicular distance from the pivot to the line of action of the force). - Sign Convention: Counterclockwise torques are standardly positive (\(+\)); clockwise torques are negative (\(-\)).
5.3 Rotational Inertia (Moment of Inertia)
Rotational inertia (\(I\)) measures an object's resistance to changes in its rotational state. It depends not only on total mass, but on how that mass is distributed relative to the axis of rotation:
Common Moments of Inertia (Mass \(M\), Radius \(R\))
- Hoop / Thin Cylindrical Shell (about central axis): \(I = M R^2\)
- Solid Uniform Cylinder / Disk (about central axis): \(I = \frac{1}{2} M R^2\)
- Solid Uniform Sphere (about diameter): \(I = \frac{2}{5} M R^2\)
- Thin Hollow Spherical Shell: \(I = \frac{2}{3} M R^2\)
- Thin Uniform Rod of length \(L\) (about center): \(I = \frac{1}{12} M L^2\)
- Thin Uniform Rod of length \(L\) (about one end): \(I = \frac{1}{3} M L^2\)
5.4 Static Equilibrium
For an extended body to remain in complete static equilibrium (neither translating nor rotating):
(If an object is in translational equilibrium, the net torque is identical about any arbitrary pivot point).
5.5 Newton's Second Law for Rotation
When a non-zero net external torque acts on a rigid body of rotational inertia \(I\):
AP Exam Tip: Choosing the Pivot to Eliminate Unknown Forces
When solving static equilibrium problems (such as a ladder resting against a wall or a sign hanging from a hinged strut):
Always place your reference pivot point at the location of an unknown, unrequested force (e.g., the hinge pin or the rough floor).
Because the distance \(r = 0\) for forces acting directly at the pivot, their torques are identically zero (\(\tau = 0\)). This removes those unknown forces from your torque balance equation, allowing you to solve for the target variable in a single equation!
📝 Practice Problem & Solution
Practice Problem 5.1: Massive Pulley with Hanging Mass
A uniform solid disk pulley of mass \(M = 4.0\,\text{kg}\) and radius \(R = 0.20\,\text{m}\) (\(I = \frac{1}{2}MR^2\)) is mounted on a frictionless horizontal axle. A light string wrapped around the perimeter of the pulley is attached to a hanging block of mass \(m = 2.0\,\text{kg}\).
The system is released from rest. Assume the string does not slip on the pulley. Take \(g = 10\,\text{m/s}^2\).
a. Draw the free-body diagram for the block and the torque diagram for the pulley.
b. Calculate the linear acceleration \(a\) of the descending block.
c. Calculate the tension \(T\) in the string during the descent.
Show Step-by-Step Solution
Part a & b: Calculate linear acceleration \(a\):
-
For the hanging mass \(m\) (translating downward): Apply Newton's Second Law: $\(\sum F_y = m g - T = m a \implies T = m(g - a)\)$
-
For the pulley \(M\) (rotating clockwise): The string tension exerts a tangential torque at radius \(R\) (\(\theta = 90^\circ\)): $\(\tau_{\text{net}} = T \cdot R = I \alpha\)$
-
No-slip condition: The linear acceleration of the string matches the tangential acceleration of the rim: $\(a = R \alpha \implies \alpha = \frac{a}{R}\)$
-
Combine equations: Substitute \(I = \frac{1}{2}MR^2\) and \(\alpha = \frac{a}{R}\): $\(T \cdot R = \left(\frac{1}{2}M R^2\right) \left(\frac{a}{R}\right) = \frac{1}{2} M R a\)$ Divide through by \(R\): $\(T = \frac{1}{2} M a\)$
-
Substitute \(T\) into the block's equation: $\(m g - \frac{1}{2} M a = m a\)$ $\(m g = \left(m + \frac{1}{2} M\right) a\)$ $\(a = \frac{m g}{m + \frac{1}{2} M} = \frac{(2.0)(10)}{2.0 + \frac{1}{2}(4.0)} = \frac{20}{2.0 + 2.0} = \frac{20}{4.0} = \mathbf{5.0\,\text{m/s}^2}\)$
Part c: Determine string tension \(T\):
Using \(T = \frac{1}{2} M a\):
(Notice that \(T = 10\,\text{N} < mg = 20\,\text{N}\), which is required for the hanging block to accelerate downward).