Skip to content

Unit 7: Oscillations

Oscillatory motion occurs when an object is displaced from a stable equilibrium position and experiences a linear restoring force that drives it back toward equilibrium.


7.1 Simple Harmonic Motion (SHM)

A system executes Simple Harmonic Motion (SHM) if the restoring force is directly proportional to displacement and directed opposite to it:

\[F_{\text{net}} = -k x \implies m a = -k x \implies a = -\left(\frac{k}{m}\right) x = -\omega^2 x\]

where \(\omega = \sqrt{\dfrac{k}{m}}\) is the angular frequency (in rad/s).

Kinematics of SHM

Assuming the oscillator is released from maximum displacement \(x = A\) at \(t = 0\):

\[x(t) = A \cos(\omega t)\]
\[v(t) = \frac{dx}{dt} = -A\omega \sin(\omega t)\]
\[a(t) = \frac{dv}{dt} = -A\omega^2 \cos(\omega t) = -\omega^2 x(t)\]
  • Maximum Speed (\(v_{\text{max}}\)): Occurs at the equilibrium position (\(x = 0\)): $\(v_{\text{max}} = A \omega\)$
  • Maximum Acceleration (\(a_{\text{max}}\)): Occurs at the turning points (\(x = \pm A\)): $\(a_{\text{max}} = A \omega^2\)$

7.2 Period and Frequency

  • Period (\(T\)): The time required to complete one full cycle of oscillation (in seconds): $\(T = \frac{1}{f} = \frac{2\pi}{\omega}\)$
  • Frequency (\(f\)): The number of oscillations completed per second (in Hertz, \(\text{Hz} = \text{s}^{-1}\)): $\(f = \frac{1}{T} = \frac{\omega}{2\pi}\)$

7.3 Canonical Oscillating Systems

1. Mass-Spring Oscillator

For a mass \(m\) attached to an ideal spring of force constant \(k\) (horizontal or vertical):

\[\omega = \sqrt{\frac{k}{m}} \implies T_s = 2\pi \sqrt{\frac{m}{k}}\]
  • Independent of: Amplitude (\(A\)) and local gravitational acceleration (\(g\)).

2. Simple Pendulum (Small Angle Approximation)

For a point mass \(m\) suspended from a string of length \(L\) in gravitational field \(g\):

\[\tau_{\text{net}} = -(mg\sin\theta) L \approx -mgL\theta \quad (\text{for } \theta \le 15^\circ)\]
\[\omega = \sqrt{\frac{g}{L}} \implies T_p = 2\pi \sqrt{\frac{L}{g}}\]
  • Independent of: Bob mass (\(m\)) and amplitude (\(\theta_0\), within small-angle regime).

7.4 Energy Transformations in SHM

In an ideal, undamped oscillator, mechanical energy continuously shifts between kinetic energy (\(K\)) and potential energy (\(U\)):

\[E_{\text{total}} = K + U = \frac{1}{2} m v^2 + \frac{1}{2} k x^2 = \text{constant}\]

At the turning points (\(x = \pm A, v = 0\)):

\[E_{\text{total}} = \frac{1}{2} k A^2\]

At the equilibrium position (\(x = 0, v = \pm v_{\text{max}}\)):

\[E_{\text{total}} = \frac{1}{2} m v_{\text{max}}^2\]

Equating the two expressions:

\[\frac{1}{2} m v_{\text{max}}^2 = \frac{1}{2} k A^2 \implies v_{\text{max}} = A \sqrt{\frac{k}{m}} = A \omega\]

AP Exam Trap: Gravity Does NOT Alter Vertical Spring Period

When a mass hangs vertically from a spring, gravity shifts the equilibrium position downward by \(\Delta y_0 = \frac{mg}{k}\).

However, because the restoring force relative to the new equilibrium is still linear (\(F_{\text{net}} = -k y'\)), the frequency and period are completely unchanged: $\(T = 2\pi\sqrt{\frac{m}{k}}\)$

A vertical spring oscillating on Earth will oscillate with the exact same period if taken to the Moon or placed in a freely falling elevator!


📝 Practice Problem & Solution

Practice Problem 7.1: Energy and Kinematics of a Spring Oscillator

A block of mass \(m = 0.50\,\text{kg}\) on a frictionless horizontal surface is attached to a spring with \(k = 200\,\text{N/m}\). The block is pulled to \(x = +0.10\,\text{m}\) (\(10\,\text{cm}\)) and released from rest at \(t = 0\).

a. Calculate the period \(T\) and maximum speed \(v_{\text{max}}\) of the oscillation.
b. Determine the speed of the block when its position is \(x = 0.06\,\text{m}\) (\(6\,\text{cm}\)).
c. What fraction of the total mechanical energy is kinetic energy at \(x = 0.06\,\text{m}\)?

Show Step-by-Step Solution

Part a: Calculate period \(T\) and maximum speed \(v_{\text{max}}\):

Angular frequency:

\[\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{200}{0.50}} = \sqrt{400} = 20\,\text{rad/s}\]

Period:

\[T = \frac{2\pi}{\omega} = \frac{2\pi}{20} = \frac{\pi}{10} \approx \mathbf{0.314\,\text{s}}\]

Maximum speed:

\[v_{\text{max}} = A \omega = (0.10\,\text{m})(20\,\text{rad/s}) = \mathbf{2.0\,\text{m/s}}\]

Part b: Speed at \(x = 0.06\,\text{m}\) using energy conservation:

Total mechanical energy:

\[E_{\text{total}} = \frac{1}{2} k A^2 = \frac{1}{2}(200)(0.10)^2 = 100(0.01) = 1.0\,\text{J}\]

At position \(x = 0.06\,\text{m}\):

\[U = \frac{1}{2} k x^2 = \frac{1}{2}(200)(0.06)^2 = 100(0.0036) = 0.36\,\text{J}\]

By conservation of energy:

\[K = E_{\text{total}} - U = 1.0\,\text{J} - 0.36\,\text{J} = 0.64\,\text{J}\]

Solve for \(v\):

\[\frac{1}{2} m v^2 = 0.64 \implies \frac{1}{2}(0.50) v^2 = 0.64 \implies 0.25 v^2 = 0.64\]
\[v^2 = \frac{0.64}{0.25} = 2.56 \implies v = \sqrt{2.56} = \mathbf{1.6\,\text{m/s}}\]

Part c: Fraction of total energy in kinetic form:

\[\frac{K}{E_{\text{total}}} = \frac{0.64\,\text{J}}{1.0\,\text{J}} = 0.64 = \mathbf{64\%}\]

(Notice: \(\frac{K}{E} = 1 - \frac{x^2}{A^2} = 1 - \frac{0.06^2}{0.10^2} = 1 - 0.36 = 0.64\)).